0.257 in. ID 0.5 in. OD 0.438 in. Long Aluminum Spacer - AndyMark, Inc

This aluminum spacer is 0.438 inches long and has an outer diameter of 0.5 inches.

0.192 in. ID 0.500 in. OD 0.813 in. Long Nylon Spacer - AndyMark, Inc

Spacers help keep things in place in a multitude of ways. You can use this to slip over a shaft that is smaller than the inside diameter, between

0.257 in. ID 0.5 in. OD 0.438 in. Long Aluminum Spacer - AndyMark, Inc

Gearbox Spacer Extrusion - AndyMark, Inc

Gearbox Spacer Extrusion - AndyMark, Inc

This spacer is used in some versions of the TileRiser Chassis. It is 7 mm in length with a 0.5 in. OD and a 0.242 in. ID.

0.242 in. ID 0.500 in. OD 0.276 in. Long Aluminum Spacer

0.319 in. ID 0.438 in. OD 0.406 in. Long Aluminum Spacer

Gearbox Spacer Extrusion - AndyMark, Inc

This aluminum spacer is 0.625 inches long and has an inside diameter of 0.141 inches.

0.141 ID 0.250 OD 0.625 Long Aluminum Spacer

0.438 In. ID 0.563 In. OD 0.5 In. Long Bushing - AndyMark, Inc

This Aluminum spacer is 0.25 inches long and has an inside diameter of 0.430 inches., This spacer is specifically designed to fit over 3/8 hex shaft.

0.430 in. ID 0.500 in. OD 0.250 in. Long Aluminum Spacer

0.438 In. ID 0.563 In. OD 0.5 In. Long Bushing - AndyMark, Inc

0.5 in. Hex Aluminum Spacer Stock - AndyMark, Inc

0.500 in. ID 0.625 in. OD 0.570 in. Long Nylon Shoulder Spacer

0.500 in. ID 0.625 in. OD 0.570 in. Long Nylon Shoulder Spacer

0.257 in. ID 0.375 in. OD 1.172 in. Long Aluminum Spacer - AndyMark