5 (297) In stock
The Janome 4mm Hemmer Foot for 9mm Machines is used for making rolled edges on light to medium weight fabrics. The channel guide holds the rolled fabric and allows for a straighter hem. The hemming (hemming) foot will allow us to provide a nice, aesthetic finish to dresses, skirts, blouses, shirts, bedding, tablecloths, table runners and curtains. It is designed for sewing light and medium thickness fabrics. Before hemming, fold the edge of the fabric twice to a width of 4 mm and it is good to press it to a length of approx. 3 cm. Then, when sewing, it is enough to guide the fabric evenly, because the guide on the foot will make a perfectly even fold of the fabric itself. The width of the hem after stitching is 4 mm.
Sewing Machines, Sergers & Accessories - Page 6
Janome Sewing Feet for 9mm Models - Janome Sewing Machine Feet
Janome Fashion & Finishing Accessory Kit for 9mm Models - Red Deer
Hemmer Foot 4mm D2 for Janome 9mm machines
Janome, Elna, Kenmore Wide Hemmer Presser Foot Set
Janome Hemmer Feet Set (4mm & 6mm) - Red Deer Sewing Centre
Janome Rolled Hem Foot (6mm) for 9mm Max Stitch Width
Janome Hemmer Feet Set (4mm & 6mm) - Red Deer Sewing Centre
Janome Products - Red Deer Sewing Centre
Sewing Machines, Sergers & Accessories - Page 6
Janome 4mm Rolled Hem Foot - 9mm Machines. 202 081 007 Cat. D
The Janome 4mm Hemmer Foot for 9mm Machines is used for making rolled edges on light to medium weight fabrics. The channel guide holds the rolled
Janome Rolled Hem D2 Foot (4mm), 9mm - Red Deer Sewing Centre
Janome Edge Stitch Foot for 9mm Machines
