4.5 (89) In stock
For more than 60 years, internal plastic coatings have been used for corrosion protection on tubing, casing, line pipe and drill pipe. One of the historic concerns with the use of internal plastic coating is the threat of mechanical damage and subsequent corrosion cell generation. Through the earlier years of usage of internal plastic coatings, applicators relied solely on enhanced surface preparation and adhesion to ensure minimal exposure of the steel substrate if damage were to occur. Even with this minimization, the potential for corrosion was still a concern for some. Due to this, a focus on developing internal coatings that offered higher degrees of abrasion resistance was initiated. At this time, several materials have been developed that offer abrasion resistances up to twenty times greater than what had previously been seen. These abrasion resistant materials allow internal coatings to be used in applications that were previously filled with alloys and glass reinforced epoxy (GRE) liners. These applications include: production/injection wells that rely on frequent mechanical intervention, rod pumping wells, completion string systems and environments containing high amounts of entrained solids. This paper outlines the development of these products including the different chemistries used and their abrasion resistance, impact, laboratory evaluation of their abrasion resistance and initial case histories of applications where internal coatings have historically been excluded.
For more than 60 years now internal plastic coatings have been used for corrosion protection on tubing casing line pipe and drill pipe. One of the
51313-02208-New Advancements in the Abrasion Resistance of Internal Plastic Coatings
PDF) Corrosion Resistance of Pipeline Steel with Damaged Enamel Coating and Cathodic Protection
PDF) Recent Aspects of Oil and Gas Internal Pipeline Corrosion Control
Downhole corrosion - ScienceDirect
PDF) Recent Aspects of Oil and Gas Internal Pipeline Corrosion Control
New Advancements in the Abrasion Resistance of Internal Plastic Coatings
Recent Aspects of Oil and Gas Internal Pipeline Corrosion Control, PDF, Corrosion
Recent Aspects of Oil and Gas Internal Pipeline Corrosion Control, PDF, Corrosion
PDF) Corrosion Resistance of Pipeline Steel with Damaged Enamel Coating and Cathodic Protection
1 s2.0 S266652392100074X Main
Abrasion testing of organic corrosion protection coating systems with a rotating abrasive rubber wheel
Recent Aspects of Oil and Gas Internal Pipeline Corrosion Control, PDF, Corrosion
PDF) Downhole corrosion inhibitors for oil and gas production -a review
Abrasion testing of organic corrosion protection coating systems with a rotating abrasive rubber wheel
Downhole corrosion inhibitors for oil and gas production – a review - ScienceDirect