4.5 (705) In stock
3/16" Brass Compression Unions are used in low-pressure applications such as air, oil, and water. They are generally used to connect lengths of copper, brass, and aluminum tubing. To make the connection, place the nut and then the sleeve over the tubing and then insert a tube into the fitting body.
Compression unions are used in low pressure application such as: air, oil, and water. They are generally used to connect lengths of copper, brass, and aluminum tubing. To make connection, place the nut and then the sleeve over the tubing and then insert tube into the fitting body. When tight, the wedging action of sleeve between body and nut create a leak free connection. Use for joining 3/16 copper, brass, or aluminum tubing in low-pressure applications (NOT brake lines).
Compression Sleeve Inside Diameter: 3/16 in
End 1 Type: Ring
End 2 Type: Ring
Finish: Brass
Material: Brass
SAE Approved: Yes
Thread Type #1: SAE
FMSI Universal: 2955
AGS Company Brass Compression Union, 3/16 1/Card
CN-308 by AGS COMPANY - Domestic NiCopp Nickel/Copper Brake Line
Ags Brass Hex Nipple, 1-7/16 Length, Male (3/8-18 NPT), 1/bag PTF
Dorman Compression Fitting-Union- 3/16 In. 490-022.1 - Advance
AGS Company Brass Compression Union, 3/16 1/Card
Ags Brass Hex Plug, Male (3/8-18 NPT), 1/bag PTF-12B
LASCO 17-6205 1/4-Inch Compression by 3/16-Inch
American Grease Stick Co. Steel Tube Nut, 1/4 (7/16-24) Inverted
American Grease Stick Co. Steel Brake Line Union, 3/16 (M10x1.0