4.6 (106) In stock
This brass tube can be used in low load applications such as roller axles or as a spacer for a #10 screw. This tube is 1.54 inches long and has an outside diameter of 0.25 inches.
0.172 in. ID 0.250 in. OD 0.750 in. Long Aluminum Spacer - AndyMark, Inc
BB Mecanum Roller Inner Axle Brass Tube - AndyMark, Inc
0.500 in. ID 0.625 in. OD 0.570 in. Long Nylon Shoulder Spacer - AndyMark, Inc
0.316 in. ID 0.360 in. OD 0.250 in. Long Nylon Spacer - AndyMark, Inc
0.192 in. ID 0.375 in. OD 0.250 in. Long Aluminum Spacer - AndyMark, Inc
0.500 in. ID 0.625 in. OD 0.570 in. Long Nylon Shoulder Spacer - AndyMark, Inc
0.222 in. ID 0.250 in. OD 0.335 in. Long Brass Spacer - AndyMark, Inc
This spacer is used in the Snap Latch Assembly.
0.192 ID 0.375 OD 0.125 Long Steel Spacer
Spacers help keep things in place in a multitude of ways. You can use this to slip over a shaft that is smaller than the inside diameter, between
0.140 in. ID 0.250 in. OD 0.156 in. Long Nylon Spacer